Acri-Soy Penetrating Clear Sealer - Satin

Penetrating Clear Sealer

Container Sizes: 1 Gallon, 5 Gallon, 55 Gallon

This product appears in the Sarasota Green Marketplace Commercial Catalog. To download our PDF of this product, please CLICK HERE.

• Premium grade penetrating clear sealer formulated from rapidly renewable resources: bio-based soy compounds and modified acrylics
• Works like conventional solvent-based sealers without off-gassing or hazardous ingredients
• Virtually odorless
• Will not alter the surface coefficient of friction
• Outperforms typical water-based and solvent-based sealers by providing long lasting protection against UV, mold, mildew, moisture, efflorescence, dusting, marring and stains through creating a molecular bond and seal
• Available in satin or low gloss sheen
• Acri-Soy™ Premium Multi-Purpose Sealer is for all horizontal traffic areas on surfaces such as concrete and wood. Acri-Soy™ MST is a matte finish masonry, stone, tile and grout sealer, ideal for flood coat applications and a no sheen vertical wall sealer. Acri-Soy™ Grout Sealer is an MST formulation packaged in a 32 oz. bottle for small use areas and primary application for tile grout sealing.
• Fast, easy and safe installation with great coverage capability

Applications

Indoor, Outdoor, Concrete, Masonry, Wood, Stucco, Adobe Plaster, Drywall, Fiber Cement, Brick Pavers, Natural Stone, Tile, Grout, and more…

Product Specifications

Coverage: 400-600 sq. ft. per gallon.  Only one coat is required for most applications. Recommend two coats for high traffic or vehicular areas.

VOC: Ultra Low VOC < 25 g/l

Eligible for LEED Credits (source: www.ecoprocote.com): 
Materials & Resources: Building Reuse, MR Credit 1, Local/Regional Materials, MR Credit 5, Rapidly Renewable Materials, MR Credit 6. Indoor Environmental Quality: Low-Emitting Materials, EQ Credit 4

Application Info

The surface area must be clean, dry and porous. Apply material in a thin even coat and avoid puddling. Flood Coat Applications: Apply by HVLP (high volume, low pressure) sprayer, 16” NylFoam pad applicator, T-Bar applicator, or 3/8” or 1/2” nap roller. You may also apply the material with a pump sprayer, then back roll. For enhanced substrate protection against excessive wear and abrasion, choose our eco-friendly professional grade Poly-Soy Satin or Gloss Topcoat Finish. For high commercial traffic or industrial traffic environments you may consider using our Eco-Tuff High Traffic Clear Finish system.

Installation Temperature: 40° F (4 C) to 120° F (49 C). Relative Humidity: 85% maximum, below 80% for best results.

Dry to Touch: 30 Min to 1 Hr depending on ambient temperature. 2nd Coat: 1 hour if applicable. Dry to TopCoat: 4-6 Hours. Open to foot traffic: 12 hours lights, 24 hours normal. Hot Tire Resistance: 7 days.

Full Cure: 5 to 7 Days (Depending on environmental conditions).