Acri-Soy MST Sealer Gallon

 Masonry, Stone & Tile Penetrating Sealer

This product appears in the Sarasota Green Marketplace Commercial Catalog. To download our PDF of this product, please CLICK HERE.

• Acri-Soy MST™ is a premium grade bio-based penetrating clear sealer that is engineered from advanced soy ester dispersion technology and modified acrylics
• Ideal for flood coat applications and a no sheen vertical wall sealer.
• Natural matte, no sheen finish
• Specially formulated as a ready to use sealer for porous masonry, natural stone, tile and grout surfaces
• Works like conventional solvent-based sealers without off-gassing or hazardous ingredients
• Contains over 20% bio-based ingredients
• Virtually odorless
• Will not alter the surface coefficient of friction
• Outperforms typical water-based and solvent-based sealers by providing long lasting resistance against UV, mold, mildew, moisture, efflorescence, dusting, marring and stains through creating a molecular bond and seal
• Fast, easy and safe installation with great coverage capability

Applications

Block Walls, Fiber Cement, Tile Grout, Mexican Tile, Flagstone, Travertine, Brick Pavers, Stucco, Plaster

Product Specifications

Coverage: 400-600 sq. ft. per gallon. Only one coat is needed for most applications.

VOC: Ultra Low VOC < 25 g/l

Eligible for LEED Credits (source: www.ecoprocote.com):
Materials & Resources: Building Reuse, MR Credit 1, Local/Regional Materials, MR Credit 5, Rapidly Renewable Materials, MR Credit 6. Indoor Environmental Quality: Low-Emitting Materials, EQ Credit 4

Application Info

The surface area must be clean, dry and porous. Apply material in a thin even coat and avoid puddling. Flood Coat Applications: Apply by HVLP (high volume, low pressure) sprayer, 16” NylFoam pad applicator, T-Bar applicator, or 3/8” or 1/2” nap roller. You may also apply the material with a pump sprayer, then back roll. Grout Applications: Use a brush or foam pad brush applicator to apply material along the grout lines. If using the 32 Ounce flip spout package, simply pour along grout lines.

Installation Temperature: 40° F (4 C) to 120° F (49 C). Relative Humidity: 85% maximum, below 80% for best results.
ry to Touch: 30 Min to 1 Hr depending on ambient temperature. 2nd Coat: 1 hour if applicable.                               \

Open To Foot Traffic: Flood Coat (Tile and Grout)-12 Hours Light, 24 Hours Normal. Grout Seal- 4-6 Hours.
Full Cure: 5 to 7 Days (Depending on environmental conditions)