• Single component, high flex, ultra tough, waterproof coating for outdoor, indoor and submersible applications
• Made with recycled content materials, the advanced formulation of cross-linking modified acrylics, urethanes, co-polymers and EPDM rubberized granules delivers a Green Building compliant safety coating with superior durability, flexibility and safety.
• Zero VOCs, non-hazardous, non-flammable
• Virtually odorless
• Outstanding durability
• Self-leveling
• Fast curing time
• Installation via a sprayer or a foam pad roller
• Engineered to withstand the coldest or the hottest climates
• Withstands abrasion, UV, chemicals and hot tire pick-up
• May be used on concrete, wood, fiberglass and metal surfaces
• Eco-Tuff™ effectively replaces conventional epoxies, urethanes and water-based coatings
• Rubberized Non-Skid Coating has 3 aggregate options, Industrial Floor Coating has no aggregate
• 100% recycled glass and cork aggregate also available for use over the Industrial Floor Coating or other EcoProcote products.
Aggregate Descriptions
Low - For typical non-slip applications where you will walk on it barefoot.
Standard - For commercial applications where liability is an issue. For outdoor public
areas or a handicap ramp.
High - For industrial uses, on equipment, in commercial truck beds.
Note: the higher the aggregate, the less easy it is to clean. What you can do is add a top coat of Industrial Floor Coating over the Rubberized Non-Skid coating so you can have even less of an aggregate than “Low”
|
Product
|
Aggregate Sizes
|
|
Rubberized Non-Skid
Concrete, wood, interior projects, non-flexible projects
|
Low
Standard
High
|
|
Rubberized Non-Skid Flexible
Boat decks, metal gangway ramp up to a ship, a patio deck made of wood where the substrate will flex under foot-traffic, a truck bed, a wooden handicap ramp.
|
Low
Standard
High
|
|
Rubberized Non-Skid AQ (aqueous/submersible)
Pools, fountains, etc.
|
Low
Standard
High
|
|
Industrial Floor Coating
This is a rubber coating, but with no added rubber aggregate.
|
Standard
Flexible
Submersible
|
|
High Traffic Clear Coat
A top coat sealer is NOT NECESSARY for EcoTuff coatings. It is recommended for high traffic apps like retail, warehouses, industrial kitchens, theme parks, etc.
|
Standard
Flexible
Submersible
|
|
2 Part WB Epoxy Primer/Sealer
Apply with a standard paint roller. Wait a minimum of 6 hours, but no longer than 48 hours before application of product after primer is applied. Make sure the surface is porous or etched for proper penetration/adhesion of the primer coat. You may sand it, use a liquid etch (like EcoEtch) or shot-blasting. For concrete, make sure it is clean and use concrete patch filler if necessary (NOT silicone).
|
n/a
|
|
1 Part WB Metal Primer
For metal substrates. Apply with a standard paint roller. Wait a minimum of 6 hours, but no longer than 48 hours before application of product after primer is applied.
|
n/a
|
|
100% Recycled Glass Aggregate, or Cork Aggregate
This would be added to the high traffic clear coat on top. Glass is typical, not cork. You wouldn’t be able to feel the cork on a rubberized flooring. Cork can be stained with SoyCrete.
|
n/a
|
